ADC 100 Specifiche Pagina 1

ADC-100 Manual v1.2 http://www.programmation.fr1. Introduction2. Connecting to PC3. Technical SpecificationsWriting you ow

PREF1 short PREF2 adc100_open_unit (short port);This routine opens the ADC-100 driver.For DOS and the 16-bit Windows driver, it checks the BIOS printe

100…..50If you are not using a channel, we recommend setting the range to ±20V. This prevents noise from theunconnected channel interfering with

PREF1 void PREF2 adc100_set_trigger ( unsigned short enabled,unsigned short auto_trigger,unsigned short auto_ms,unsigned short channel,unsigned short

1 - channel B only2 - both channelsno_of_channels specifies the number of channels used.An example of a call to this routine using both channels A and

If the specified unit is open, The routine returns version information about the ADC-100 DLL, the Windowsdriver and the sampling rate.Str - character

DOSFrom DOS, it is possible to access the ADC-100 in C and Pascal using the DOS driver. It is not possible tocall the ADC-100 DOS driver from BASIC.Th

The Windows 95 32-bit driver, PICO.VXD, is installed in windows\system, It is loaded using a reference insystem.ini:[386enh]...device=pico.VXD

files:a100test.ca100test.rceither adc10016.lib (All 16-bit applications)or adc10032.lib (Borland 32-bit applications)or adc100ms.lib (Microsoft Visual

However, you can also write an Excel macro which calls adc100xx.dll to read in a set of data values. TheExcel Macro language is similar to Visual Basi

file picopar.tar, available from the Pico web site, contains source code for the driver and exampleprograms, together with full instructions to compil

Safety WarningWe strongly recommend that you read the general safety information below before using your product forthe first time. If the equipment

Update history28Feb02 MKG Added description of USB and Linux support15May02 MPB Updated safety warning for LVD compliance29May02 MPB Updated USB infor

Legal infoGrant of licenseThe material contained in this release is licensed, not sold. Pico Technology Limited grants a license tothe person who inst

IntroductionThe PICO ADC-100 and ADC-101 are medium speed analog to digital converters with two analog inputchannels and programmable input voltage ra

PicoScope should now display the voltage that you have connected. If you are using scope probes, whenyou touch the scope probe tip with your finger,

StreamingIf a device is connected to a PICO USB parallel port, data is collected asynchronously, without anyintervention from the PC. This gives cons

DOS stand-alone programThe program ADC100.exe reads in a block of data values from the ADC-100 and writes them to a file, asraw ADC values. See scalin

DriversThe ADC-100 and ADC-101 are supplied with driver routines that you can build into your own programs.There is also a DOS stand alone program tha

specify the printer port that is connected to the ADC-100take a single reading from a specified channelspecify a trigger event from a specified channe